请稍侯

synology 升级 72 之

19 September 2023

Synology 升级 7.2 之后

安装 Wireguard
Wireguard SPK for your Synology NAS
Wireguard VPN for your Synology NAS

NVMe SSD做为普通存储空间不兼容报错修复 Youtube - 群晖Synology 7.2 NVMe SSD做为普通存储空间不兼容报错修复 知乎- 群晖 Synology 7.2 NVMe SSD 做为存储空间不兼容报错
Synology_HDD_db

群晖Synology客户端配置

  1. 首先下载 ,,安装详细参见： https://github.com/vegardit/synology-wireguard 与 https://suzuhafan.com/synology/synology-920-install-wireguard-on-dsm7.html ； 下载：synology-wireguard 7.1 synology-wireguard 7.2

  2. 安装

# 下载
wget https://github.com/vegardit/synology-wireguard/releases/download/WireGuard-1.0.20220627-DSM7.1/WireGuard-geminilake-1.0.20220627_DSM7.1.spk
# 安装
synopkg install WireGuard-geminilake-1.0.20220627_DSM7.1.spk

# start 脚本生成wg0.conf配置文件, 添加并加 interface & peer 节点信息
/var/packages/WireGuard/scripts/start

# 把 wg0.conf 复制到 /etc/wireguard/ 目录下，如果/etc/wireguard目录不存在就手动建一个
cp /volume1/@appconf/WireGuard/wg0.conf /etc/wireguard/wg0.conf

wg-autostart enable wg0

注：wg0.conf

[Interface]
PrivateKey = xxxxxxxxxxxxxxxx
Address = 10.10.10.7/24
# Don't add the DNS = x.x.x.x because setting is unsupported, otherwise would report "resolvconf: command not found"
# DNS = 8.8.8.8

PostUp = iptables -A FORWARD -i %i -j ACCEPT; iptables -A FORWARD -o %i -j ACCEPT; iptables -t nat -A POSTROUTING -o ovs_eth0 -j MASQUERADE;
PostDown = iptables -D FORWARD -i %i -j ACCEPT; iptables -D FORWARD -o %i -j ACCEPT; iptables -t nat -D POSTROUTING -o ovs_eth0 -j MASQUERADE;


[Peer]
PublicKey = XXXXXXXXXXXXxxxxxx
PresharedKey = XXXXXxxxXXXXXXxxxxx
AllowedIPs = 10.10.10.0/24
PersistentKeepalive = 25
Endpoint = 121.40.x.x:51820

启动

/var/packages/WireGuard/scripts/start
  1. 启动配置 
    # 启动
sudo wg-quick up wg0
# 关闭
sudo wg-quick down wg0
  2. 查看连接状态 
    sudo wg show wg0
  3. 设置开机启动，群晖上面该命令和 Linux 有区别 
    # 开启
sudo wg-autostart enable wg0
# 关闭
sudo wg-autostart disable wg0

WireGuard-UI Wireguard web insterface WireGuard-UI 安装和配置
wireguard-ui github